Main Frame in Course Schedule Fram Set

Fields and Waves I and Electronic Instrumentation Schedules – Summer 2007

Version 1: 17 May 2007 (There will be updates)

Monday	Tuesday	Wednesday	Thursday	Friday
FWI: 0.1,1.1 Pre-Project EI: Ex 1 Pre-Project (5-21)	FWI: 1.1,2.4 EI: Ex 1	FWI: 1.2,1.3 EI: Ex 1	FWI: 1.3, 1.4 EI: Ex 2	FWI: 1.6 EI: Ex 2
(5-28) Holiday	FWI: Proj 1 EI: Ex 3	FWI: 2.1, 2.2 HW1 Due EI: Ex 3	FWI: 2.3 EI: Ex 4	FWI: Quiz 1 EI: Quiz 1
FWI: 3.1, 3.2 EI: Ex 4 (6/4)	FWI: 3.2, 3.3 EI: Ex 5	FWI: 3.4 EI: Ex 5	FWI: 3.5, 3.6 EI: Proj 1	FWI: 3.6 EI: Proj 1
FWI: 4.1,4.2 HW2 Due EI: Ex 6 (6/11)	FWI: 4.3 4.4 EI: Ex 6	FWI: 4.4, 4.5 EI: Ex 6,7	FWI: 4.6, 4.7 EI: Ex 7	FWI: 4.7, 4.8 HW3 Due EI: Ex 7
FWI: Quiz 2 EI: Quiz 2 (6/18)	FWI: 5.1, 5.2 EI: Ex 7,8	FWI: 5.2, 5.3 EI: Ex 8	FWI: 5.4 EI: Ex 8	FWI: 5.5, 5.6 EI: Ex 8
FWI: Proj 2 HW4 Due EI: Proj 2 (6/25)	FWI: Proj 2 EI: Proj 2	FWI: Catch Up & Clean Up EI: Catch Up & Clean up	FWI: Review EI: Review	FWI: Final Ex EI: Quiz 3

For Fields and Waves I: The lesson numbers used this summer differ from those used in the past because the topic order has changed. In older materials (e.g. solutions to lessons) the older numbering will be used. Please check the Lesson Number Conversion document. The regular webpages also have a great deal of useful information so students should check them out thoroughly.

For Electronic Instrumenation: Information on the experiments can be found on the regular EI webpage however, the experiment write-up and the slides have been modified for the use of the new IO Board, which we will not be using, at least during the first part of the summer. Links to the correct labs and slides are found below.

There are 29 total class days. On 3 days there will be a major quiz or final exam. One day is set aside for review. On the other 25 days, there will be a short quiz that must be completed during class or handed in during the first 10 minutes of the next class. Fields and Waves I HW assignments are due as indicated. For Electronic Instrumentation, each experiment report is due on the last day of the following scheduled experiment or project. Fields and Waves I students should keep a notebook for the work assigned in the daily lessons. These notebooks will be looked over from time-to-time by either the instructor or a TA.

Note that Project 2 for Fields and Waves I and for Electronic Instrumentation is on the same topic – the Beakman's Motor. Please read over the write up for your class to see what is being asked for. You are to work in groups of 2 or 3. Each group will submit one report, but each student should build a motor. One motor in each group must be built exactly to the specifications of the project. That is, you must use the paper clips, rubber band, etc. just as given. However, you are free to design your second and/or third motor any way you wish. The only requirement is that you must use a 1.5 volt battery for your power source. You can change magnets, commutator designs, …anything you wish except for the battery.