Nov-02-1999

Study the focus of the beam with sweep offset and the shutter

Nov-03-1999

Take the secondary beam line off from the 4.5" port to allow installation of the LH attenna.

Nov-04-1999

1. Use the injection gun only to test the secondary beamline sweep plates

2. Re-calibrate the energy analyzer. The gain curve is consistant with the theory and what we had before

Nov-08-1999

Use the BPM, sweep plates to monitor the primary beamline. The beam signal dissappears during the shot.

Nov-10-1999

Try to locate the reason of the beam loss. Try shorting part of the accelerator column, putting H.V resistor across the extractor and Pierce stack...